Wednesday, January 16, 2019

Snow Camping: Artist Point in North Cascades

Mt Baker at Sunrise

This past weekend I went snow camping at Artist Point with some of my close girl friends + 11 other rad women who are all part of the PNW Outdoor Women's group and it was such a blast! Sarina and I have talked about snow camping at Artist Point for the longest time, but the stars never aligned until this weekend and the weather couldn't have been more perfect! We almost snow camped at Artist Point last winter, but I got sick and wasn't feeling it so we did a day trip to snowshoe Artist Point, then car camped nearby. Which was equally as fun! (You can read about that trip here)

Coordination & Planning

I originally had plans to hang out with my mom and wasn't going to be able to hang this weekend. But my mom ended up catching a bad cold and postponing her trip, so I joined the planning party a lil late. So I messaged the group of friends 5 days before the weekend to see what they had in mind and I got a "SNOW CAMPING!" response back. Well of course I was down for snow camping! But the question was where? With living in Washington comes the iffy winter weather, high avalanche dangers, and minimal sunny days. So in the Facebook chat I was in, a couple of locations got thrown out there, but we waited till Friday to make the final decision of where we were headed Saturday. Other ideas thrown out there had been Hex Mountain and a lake near Crystal Mountain. In the end, avy dangers lowered for the Mt. Baker area and Artist Point it was! (We use NWAC to check avy conditions)

Other things we coordinated during the week before the actual location was picked were: how many tents are we bringing and who's sharing with who? Who's down to drive and wants to carpool? Who has a snow shovel? Who's bringing a sled? (Jk jk, I was the only one who wanted a sled lol). What time do you all want to leave? After we hammered out all these details, we all had a lot of packing to do.

Mt Baker

Trip Details

Location: Mt Baker Ski Area
Dates camped: January 12-13, 2019
Miles hiked: 4+ miles R/T
Elevation Gain: 1000 ft
Parking: $10 for overnight parking, permit bought at ski lodge. Free day use parking
Dogs: Allowed
Main Snow Gear Used: Snowshoes
Driving Distance: 240 miles R/T from Lynnwood, WA

Saturday January 12, 2019

Kaelee and Katherine carpooled to my house in Lynnwood and I drove us to Artist Point in Cody's Tacoma (4 Wheel/All Wheel drive recommended, but not necessary to get to Artist Point/Mt Baker Ski area parking lot, chains highly suggested though).

We pulled into the parking lot around 9:40 AM and it was packed! Since we were parking overnight we were told to look for a spot on the rock wall. We did a drive by and there were no spots and by the time we looped back around to ask the parking attendant again where to park, the lot was a zoo! We eventually found parking on the outskirts of the lot. After we loaded up our packs, Amanda and I headed to the ski lodge office to buy overnight parking passes while everyone else headed to the trail head to wait for us (if I had known we needed to buy a pass at the office, I would probably have swung by there first with the car, then parked).

 Katherine and Amanda scoping out the area 
 Nikki and Sarina's tent
Kaelee and my tent
Table Mountain in the background

Pulk Sled

I made a pulk sled for this trip (aka I bought a $10 sled, drilled some extra holes in it and added paracord, so I could drag my gear up, instead of carrying all of it on my back). I thought I was going to be super slow with it attached to me, but it wasn't too bad! For the most part on the way up, the sled just stayed right behind me and it never tipped. On the way down, we attached the back end of the sled to the front of Kaelee so that the sled wouldn't run into me while we went downhill. Overall, we gave this pulk sled a 10/10! It also turned into great entertainment after we setup camp, as we all took turns sledding down the hill with it.
 Photo by: Amanda 
 Photo by: Amanda 
Photo by: Amanda

We got to the area where we all decided to setup camp around 1:00 PM and began digging holes in the snow to pitch our tents. For us, we wanted to create a small barrier so that if there were wind we wouldn't get pummeled. Also creating a nice flat spot to pitch your tent is key for you not to have a miserable night. Once our tent was pitched, we all hung out, ate some lunch, and sledded a bit before Teresa gave a crevasse demonstration with Nikki. Then some of us hiked towards Huntoon Point to check out the area and caught sunset.

We eventually all gathered together for dinner, hung out, took some night photos, and then Kaelee and I crawled into our shared tent around 7:30 PM and called it a night. (Yes, you spend a lot of time in your tent when snow camping in the winter)

Oh, if you're curious what I ate for dinner while snow camping: a $3 packet of ramen I bought from the Asian market. Hot soupy noodles sounded way more appealing to me than a Mountain House.

 Just chillin'
 How many people can say they went sledding under Shuksan?
Photo by: Amanda 
 Mt Shuksan
 Amanda and Sarina
Practiced some long exposure shots

Sunday January 13, 2019

We all woke before sunrise (it was 7:55 AM that day), and my group of friends gathered around outside our tents with cameras in hand, ready for the sunrise show. Sunrise this trip was better than sunset. After sunrise, we ate breakfast with everyone, packed up our stuff, and headed back down to the parking lot. It took us 40 minutes to get back to the car. Artist Point is not a hard hike at all.

Overall, it was another amazing snow camping trip with great company and amazing views! This was my first snow camping trip using my new 0 degree sleeping bag and I never got cold! My Oboz hiking boots did soak through and woke up to some very stiff and frozen boots, but it wasn't a big deal for me.

Until next time North Cascades!

 Sunrise was the best part!
 Hi Amanda!
 Our lil tent city
Nikki in her element
That sunrise show
That group shot (edited and taken by: Amanda)




18 comments:

  1. This is very interesting content! I have thoroughly enjoyed reading your points and have come to the conclusion that you are right about many of them. You are great. Try reading this for more info

    ReplyDelete
  2. Nice article, Which you have shared here about the Snow Camping. Your article is very interesting and I liked your way to share your experience in this post. Thank you for sharing this article here. Professional Ice Control Service Chilliwack

    ReplyDelete
  3. Dome tents are constructed from a tent pole frame and lightweight fabric. They are simple to erect and are freestanding, utilizing guy ropes to keep the tent in place. They have a large internal space. Best quality camping tent in India

    ReplyDelete
  4. This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free. Honda SnowBlower Reviews

    ReplyDelete
  5. I’m going to read this. I’ll be sure to come back. thanks for sharing. and also This article gives the light in which we can observe the reality. this is very nice one and gives indepth information. thanks for this nice article. cheap ski bindings

    ReplyDelete
  6. A simple bookmarking tool that makes it easy to save, organize and share your favorite web pages. Access your bookmarks from any computer, phone or tablet. Listango works on all modern web browsers… allcampingtents.com

    ReplyDelete
  7. Positive site, where did u come up with the information on this posting? I'm pleased I discovered it though, ill be checking back soon to find out what additional posts you include. pros and cons of s30v steel

    ReplyDelete
  8. I love this blog!! The flash up the top is awesome!! 50 free instagram likes uk

    ReplyDelete
  9. I really get some useful content from your article which you have shared here. It is a gainful article for everyone. Keep upgrading our knowledge by share these types of articles, Thank you. commercial snow removal vancouver

    ReplyDelete
  10. On the off chance that you camp at public campsites, there is a decent possibility that you will get a flame broil or a grill and all the cooking fixings from the camp store. Beside that, you should convey different necessities like garments, tents, camping cots, from home with you. Camping Piana

    ReplyDelete
  11. We are really grateful for your blog post. You will find a lot of approaches after visiting your post. I was exactly searching for. Thanks for such post and please keep it up. Great work. camping products online

    ReplyDelete
  12. Great, thank you so much for sharing such an amazing blog. Ogen Infosystem is one of the leading website development company in delhi, visit following webpage for more information about website development and website designing.
    Website Development Company

    ReplyDelete
  13. Offered programs. A few camps run various projects that can upgrade the abilities and gifts of your children. There are likewise camps that have game exercises for the families. boot camps for troubled teens

    ReplyDelete
  14. I think this is an informative post and it is very beneficial and knowledgeable. Therefore, I would like to thank you for the endeavors that you have made in writing this article. All the content is absolutely well-researched. Thanks... Accesorios Camping

    ReplyDelete
  15. Here’s a comment not from a bot or advertiser, thanks for this post and the details. I and a few others are looking at doing this same thing this week and I am looking for gear lists (like a snow shovel and 0° bag!) and wonder what else is needed to really really stay warm…. Thank you!

    ReplyDelete
  16. 3D printing has come to the point the place companies are printing client grade eyewear with on-demand custom fit and styling . On-demand customization of glasses is possible with speedy prototyping. The course of was initially created by Adrian Bowyer and was then constructed upon by German RepRap. To turn into a viable industrial production choice, there are a few challenges that 4D printing should overcome. The challenges of 4D printing embrace truth that|the truth that} the microstructures of those printed sensible materials have to be near or higher than the elements obtained via conventional machining processes. New Direct CNC and customizable materials have to be developed which have the power to persistently respond to various exterior stimuli and alter to their desired shape.

    ReplyDelete